Record, dictate and transcribe
Record a voice note or a class with everyone's agreement, hear the moment a note was written, dictate, and turn a lecture into notes at their moments.
You can keep sound in your logbook: a short voice note, or a whole class. You can also speak a note instead of typing it, and turn a lecture video or a recording into notes at their moments. Every recording stays in your logbook, on this device.
Before you begin
- Everything here starts in a session, from More at the top of the session.
- A voice note works without an account. Recording a class, dictating, transcribing and finding slide changes need a Soundings account that includes them. See Sign in and manage your account. Without one, they show in More with a small mark beside them; selecting one says what it does and how to add it.
- The first time you record, your browser asks to use the microphone. Allow it.
Record a voice note
In a session, select More, then Record a voice note.
Select Record, and speak.
The window shows Recording, the time so far, and a level that moves with your voice. A voice note can be up to 5 minutes long.
Select Stop.
Optional: in A few words with it (optional), type what the note is about.
Select Save. To throw the recording away, select Discard.
Soundings says Voice note saved. The note plays from the session's list.
Record a class, with everyone's agreement
Record a class only when everyone who can be heard has agreed: the teacher, and anyone else who speaks. In many places, the law requires it.
In a session, select More, then Record this class.
In Who agreed to be recorded, type who agreed, such as
The teacher and the class, asked at the start.Tick Everyone who can be heard agreed to be recorded.
Record can't be selected until you have done both.
Under Record, choose where the sound comes from:
- The class’s tab (your browser asks which tab; choose “Share tab audio”), for an online class in another tab.
- The microphone (a class in the room), for a class you are sitting in.
Select Record. For a tab, choose the class's tab in the window your browser opens, and turn on its sound.
A class recording can be up to 3 hours long.
When the class ends, select Stop.
Optional: in A note with it (optional), type a note.
Select Save.
Soundings says The class recording is saved in this session. Notes you wrote during it can play from their moment.
The recording is saved as a note in the session, with who agreed to be recorded. It stays in your logbook on this device, and syncs to your other devices if you sync. Nothing is sent to Soundings.
Hear the moment a note was written
In a live-class session, each note keeps the time on the class clock. When you recorded the class, a note written during it can play the recording from that moment. See Take notes in a live class.
Under a note written during the class, select Hear this moment.
The window This moment in the class recording opens, and plays from ten seconds before you wrote the note.
Select Close when you have heard it.
Dictate a note
In a session, select More, then Dictate a note.
The window says where your voice goes:
- Your browser recognises speech on this device: the sound stays here.
- Your voice is recorded here, then transcribed by your own AI provider, on your key. This needs an OpenAI or Groq key in Settings › AI. See AI helpers: hints, answers and suggestions from your notes.
When neither can be used, the window says so, and there is no Dictate button.
Select Dictate, and speak.
Select Stop.
Your words show in The note. Correct them if you need to.
Select Save as a note.
Soundings never sends your voice to a speech service you did not choose. When your browser can only recognise speech on its maker's servers, Soundings doesn't use it.
Transcribe a lecture or a recording
A transcript turns what was said into notes, each at its moment. You can search them, and the AI helpers can use them. Transcribing works with a video or audio file you opened in the session, or with a class recording. It doesn't work with YouTube or Vimeo.
Open the session, with the video or audio file open in it.
Select More, then Transcribe this video or Transcribe this recording. For a class recording, select Transcribe the class recording.
The window says that the sound is read in your browser and sent, in pieces of up to 10 minutes, to your own AI provider (OpenAI or Groq), on your key. Your provider bills you.
Select Transcribe.
The window shows each piece as it goes, such as Transcribing… piece 1 of 3.
When it has finished, Soundings adds the transcript as notes, each at its moment and tagged #transcript. Select a note's moment to play the video from there.
Transcribe a YouTube video with Gemini
With a Google Gemini key connected in Settings › AI, Soundings can ask Gemini for a YouTube video's transcript.
Open the session, with the YouTube video open in it.
Select More, then Transcribe with Gemini.
The window says what is sent: the video's YouTube address, not the video, goes to Google Gemini on your key. Google reads its own video.
Select Transcribe.
A long lecture can take a minute or two.
The transcript is added as notes at their moments, tagged #transcript and marked AI. AI: draft a summary and the other AI helpers can then use it.
- Only public videos work, not private or unlisted ones.
- Google offers this as a preview feature, with a daily limit, and may change it.
- It's an AI transcript, so it can mishear words. Check the notes against the video.
- With another AI provider, paste YouTube's own transcript instead, as below.
Paste a transcript from YouTube or a course site
YouTube and Vimeo videos can't be transcribed in Soundings, but many show their own transcript. You can paste it, and it becomes notes at their moments, the same as a transcript Soundings makes.
On YouTube, under the video, select …more, then Show transcript. Select the transcript's text, with its times, and copy it. On a course site, open its transcript panel and do the same.
In your session, with the video open, select More, then Paste a transcript.
Paste the text. Or select Or open a caption file and choose an
.srtor.vttfile.Soundings says what it found, such as Found 124 lines, from 0:00 to 42:10.
Select Add as notes.
The passages are added at their moments, tagged
#transcript. AI: draft a summary and the other AI helpers can now use them.
The text is read on your device. Nothing is fetched from the video site, and nothing is sent anywhere.
Find the slide changes in a lecture video
Soundings can find each new slide in a lecture video, and add a chapter there. It compares the video's frames on this device, and sends nothing anywhere. It needs no key.
Open the session, with the lecture's video file open in it.
Select More, then Find slide changes.
The window Chapters from slide changes shows how much of the video it has read. Then it says how many slide changes it found, and when.
Select Add them as chapters, or Not now.
Each chapter is a note at its slide change, such as Chapter 1. Rename them as you like.
This works with video files only. YouTube and Vimeo don't let a page read their frames.
Find questions and tasks in a transcript
After you transcribe a session, AI can find the questions asked aloud and the tasks given out, such as homework.
In the session, select More, then AI: questions and tasks from the transcript.
Select Find them.
The window lists Questions asked aloud and Action items.
Beside each one you want, select Add as a question or Add as a task.
A task is added as a checklist note. Each one you keep is tagged
ai-suggested.
This sends the session's transcript passages to your AI provider, on your key. See AI helpers: hints, answers and suggestions from your notes.
If recording doesn't start
The window says what went wrong. For example:
- Your browser didn’t allow recording. Allow it for this page (usually from the icon in the address bar), then press Record again.
- No microphone was found. Plug one in or switch it on, then press Record again.
- The microphone couldn’t be started. Another app may be using it: close that app, then press Record again.
Try it: Open Courses, then a session
Related articles
- Take notes in a live class: Start a live-class session, take notes against the class clock, mark moments on a phone, and end the class.
- Write notes, questions and answers: Use the capture box to write notes, park questions, answer them and file entries under topics, each at its moment.
- AI helpers: hints, answers and suggestions from your notes: Connect an AI service on your own key, then ask for hints, answers from your own notes, and suggestions you approve one by one.
- Open a video file: Open a video from your device in a session, control it from the keyboard, add captions, and open it again after a reload.